Problem ripping Godfather II and III

[MadGreek]

I have a weird problem with Godfather II and III BD's.

The first part had no problems. The ripping on part 2 stops at 12% and on part 3 at 4%.

The reading speed starts to slowly to 0...

I have a LG GGC-H20L. Updated the firmware to 1.03, but no help.

[Webslinger]

click http://forum.slysoft.com/showthread.php?t=4503

[MadGreek]

Here's specs for part 2:


The Godfather part 2 / Region All / USA
-------------------------------------------------
Summary for drive D: (AnyDVD 6.4.6.9)
HL-DT-ST BDDVDRW GGC-H20L 1.03 410515085O81LF1605
Drive (Hardware) Region: 0 (not set!)

Media is a Blu-Ray disc.

Total size: 23438016 sectors (45777 MBytes)
Video Blu-ray label: GODFATHER_PART2_USA
Media is AACS protected!
Removed AACS copy protection!
-------------------------------------------------
Error message: Error reading drive D: (part 2 at 12% and part 3 at 4%)
When I tried to rip to iso I got to 13% with part 2.

[Adbear]

sounds like faulty discs or drive, mine ripped fine

[MadGreek]

sounds like faulty discs or drive, mine ripped fine

I have not had any problems with the first 6 discs. Hopefully someone could say it's not the discs... :bowdown:

[Webslinger]

ArcCD (system32\drivers\ArcCD.sys), Version: 1.0.0.10 (1.0.0.10)
Company: ArcSoft Inc.
Product: ArcSoft UDF Reader
Copyright: Copyright (C) 2006-2007, ArcSoft, Inc. All rights reserved.
Description: ArcCD.sys ReadOnly
FileVersion: 1, 0, 0, 10
ProductVersion: 1, 0, 0, 10



Afc (system32\drivers\Afc.sys), Version: 1.0.0.2 (1.0.0.2)
Company: Arcsoft, Inc.
Product: Arcsoft(R) ASPI Shell
Copyright: (C) Arcsoft, Inc. 1999-2005. All rights reserved.
Description: Arcsoft(R) ASPI Shell
FileVersion: 1, 0, 0, 2
ProductVersion: 1, 0, 0, 2


These arcsoft filters may cause conflicts/strange issues with Anydvd.

1.
i) Create a backup of your registry
ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
(it's also an excellent program imo)
iii) Go to Tools > Filter Driver Load Order. Select "ArcCD". Click "Remove Selected filter". click "ok" Select "Afc". Click "Remove Selected Filter". Click "ok".
iv) Reboot

Keep in mind that whatever programs installed those entries in your registry may no longer function properly.

2. If you still get read errors (the discs are likely faulty), visit http://forum.slysoft.com/showthread.php?t=12460

[Adbear]

I have not had any problems with the first 6 discs. Hopefully someone could say it's not the discs... :bowdown:
If it turns out to be faulty discs why would the fact that others worked make any difference? Hopefully you'll get lucky and removing the filters will make it work, but from experience it sounds more likely it's either the disc or drive

[MadGreek]

If it turns out to be faulty discs why would the fact that others worked make any difference? Hopefully you'll get lucky and removing the filters will make it work, but from experience it sounds more likely it's either the disc or drive

You were right. Same thing with Imgburn... :(

But thanks a lot guys for the fast replies!