View Full Version : Saw III
donandjudyo
30th January 2007, 00:57
Anybody having problems copying Saw III?
b1030
30th January 2007, 01:07
Anybody having problems copying Saw III?
There have been numerous threads concerning this title.
Check them out, sure they'll be useful. Are you using Clone DVD 2 with AnyDVD? If not, they are "Must Have" software that is worth every cent paid!!:bowdown:
DeM074
30th January 2007, 01:37
No problems perfect FULL BACKUP! Shrink encounters error w/ AnyDVD 6.1.1.4. Went an alternative route for encryption methods. Sorry forgot to mention. Again I apologize.
Clams
30th January 2007, 02:42
Are you using Clone DVD 2 with AnyDVD? If not, they are "Must Have" software that is worth every cent paid!!:bowdown:
Really? I'm sure they are worth every cent paid, but the purpose of AnyDVD (alone!) is that it runs in the background and will work with ANY third party ripper/burner - not just CloneDVD (a great product).
-W
Webslinger
30th January 2007, 02:55
Anybody having problems copying Saw III?
http://forum.slysoft.com/showpost.php?p=2628&postcount=18
Not if you're using Slysoft products exclusively . . .
Clams
30th January 2007, 03:12
http://forum.slysoft.com/showpost.php?p=2628&postcount=18
Not if you're using Slysoft products exclusively . . .
Is that a brand new PREREQUISITE for using AnyDVD??
Last time I checked the Slysoft front page, it ran in the background and allowed you to use your ripper and/or burner of YOUR CHOICE. Has that changed just because SAW3 came up with a new copy protection scheme? ("I'd bet not)
AnyDVD alone has a GREAT history of quickly catching up with new protection schemes.Just give it a moment to adapt.
It always has so far!! :D
-W LOVES AnyDVD
bserker
30th January 2007, 10:19
Really? I'm sure they are worth every cent paid, but the purpose of AnyDVD (alone!) is that it runs in the background and will work with ANY third party ripper/burner - not just CloneDVD (a great product).
-W
I agree 100%. After the latest updates to AnyDVD and CloneDVD, I had no problems with Saw 3! Great products!!:D
Webslinger
30th January 2007, 12:55
Is that a brand new PREREQUISITE for using AnyDVD??
Of course not
However, it's reasonable to assume Slysoft can support its own products in a more timely fashion than third party products. Therefore, if you want a solution for Shrink with Anydvd, for example, chances are you will be waiting more often than those who use Clonedvd2 or Clonecd.
SlyFox 1
30th January 2007, 13:56
Although most DVD Copy programs will work seemlessly with AnyDVD, CloneDVD2 is the best. Shrink while a great program in its day and still is in many way is old and currently unsupported. Give CloneDVD2 a try, 21 day free trial, you have nothing to lose. :agree:
JKeller1@Insight.rr.com
30th January 2007, 18:50
I also had troubles with Shrink, (would not read my Drive) So I tried 21 day free trial Clone DVD2, I Already have Any DVD, It seamed like it read and brun't fine, but when I played it ,it stopped and and started, jerky, jumped like 6 or 7 seconds at a time. I tried three times, Slowed burn speed down, Tried both Clone 2 functions, CopyDVD &
Clone DVD same results Any suggestions out there Thanks
Webslinger
30th January 2007, 18:59
I also had troubles with Shrink, (would not read my Drive) So I tried 21 day free trial Clone DVD2, I Already have Any DVD, It seamed like it read and brun't fine, but when I played it ,it stopped and and started, jerky, jumped like 6 or 7 seconds at a time. I tried three times, Slowed burn speed down, Tried both Clone 2 functions, CopyDVD &
Clone DVD same results Any suggestions out there Thanks
1. Visit your burner's website, and update your burner's firmware
2. Use Nero cd-dvd speed to change the booktype: http://www.cdspeed2000.com/
This is a free program. (Click "Extra", then "Bitsetting". Make the change to "dvd-rom" and click "set".)
3. Use good quality blank media. Try Verbatim (CMC), Maxell Broadcast Quality, Taiyo Yuden, etc.
DeM074
31st January 2007, 06:13
I also had troubles with Shrink, (would not read my Drive) So I tried 21 day free trial Clone DVD2, I Already have Any DVD, It seamed like it read and brun't fine, but when I played it ,it stopped and and started, jerky, jumped like 6 or 7 seconds at a time. I tried three times, Slowed burn speed down, Tried both Clone 2 functions, CopyDVD &
Clone DVD same results Any suggestions out there Thanks
If you adjusted the drive speed it could very well be your media. :cool:
Kahboom
31st January 2007, 14:58
I watched Saw III from the original disk on a laptop, and it paused frequently, but never more than a fraction of a second. It was irritating, and sometimes, the dialog was inaudible where it kept pausing. I assume this is from the 90 unreadable sectors that AnyDVD was able to recognize. I had problems with Shrink also.
Webslinger
31st January 2007, 15:16
I watched Saw III from the original disk on a laptop, and it paused frequently, but never more than a fraction of a second. It was irritating, and sometimes, the dialog was inaudible where it kept pausing. I assume this is from the 90 unreadable sectors that AnyDVD was able to recognize.
What happens if you disable Anydvd and watch it?
I had problems with Shrink also.
Anydvd 6.1.1.4 will not currently work with Shrink 3.2 on this title.
visit http://forum.slysoft.com/showthread.php?t=417