View Full Version : Help with non-working old rips
charchee
11th February 2010, 12:16
Hi,
I have many HDDVD images that do not play anymore in TMT. I suspect that they are unprotected images and this is the reason why.
Is there a 'simple' solution to get them working or is it a question of re-ripping ?
Cheers
Ch3vr0n
11th February 2010, 13:02
have anyDVD running, mount the images in a virtual drive like "Virtual Clone Drive" available on the main slysoft page, and check if a protection is found. If there isnt then there is another item the cause of your problem
charchee
11th February 2010, 13:07
this is info from one image
Summary for drive F: (AnyDVD 6.6.1.3)
ELBY CLONEDRIVE 1.4
Drive (Hardware) Region: 1
Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (parallel)
Total size: 14299504 sectors (27928 MBytes)
Video HD DVD label: Bourne Identity HDDVD
Media is not AACS protected.
Modified DISCID.DAT!
AbMagFab
11th February 2010, 13:18
Hi,
I have many HDDVD images that do not play anymore in TMT. I suspect that they are unprotected images and this is the reason why.
Is there a 'simple' solution to get them working or is it a question of re-ripping ?
Cheers
Didn't TMT stop supporting HDDVD?
charchee
11th February 2010, 13:32
i'm running 2.1.6.131 and it plays protected HDDVD images and folder structure's fine.
just appears not the images I made ages ago before the wisdom of keeping protection.
i'm hoping there is a 'simple' solution other than re-ripping ??
Ch3vr0n
11th February 2010, 13:36
you could try upgrading to TMT3
@ AbMagFab : Afaik it didnt no
profcolli
11th February 2010, 19:21
this is info from one image
Summary for drive F: (AnyDVD 6.6.1.3)
ELBY CLONEDRIVE 1.4
Drive (Hardware) Region: 1
Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (parallel)
Total size: 14299504 sectors (27928 MBytes)
Video HD DVD label: Bourne Identity HDDVD
Media is not AACS protected.
Modified DISCID.DAT!I mounted the same 'unprotected" image and it plays fine in TMT 2.1.6.131 - just had to allow it to check for an update first. As you can see, I am using the latest beta of AnyDVD HD 6.6.2.2. Your image appears to be a different size - IIRC mine was created using CloneCd. Note your media shows as dvd and booktype shows as dvd-rom rather than hd-dvd for both - how did you create the image?
Summary for drive I: (AnyDVD 6.6.2.2)
ELBY CLONEDRIVE 1.4
Drive (Hardware) Region: 1
Media is a HD DVD.
Booktype: hd-dvd (version 1), Layers: 2 (parallel)
Total size: 13204960 sectors (25790 MBytes)
Video HD DVD label: BOURNEIDENTITY
Media is not AACS protected.
Modified DISCID.DAT!
SamuriHL
11th February 2010, 21:08
Turn off AnyDVD for the mounted ISO on one of these non-working images.
charchee
12th February 2010, 10:06
i have tried two images without anydvd enabled and they do not play.
am i stuffed !?
DukeOfUrl
12th February 2010, 10:52
Note your media shows as dvd and booktype shows as dvd-rom rather than hd-dvd for both - how did you create the image?
You haven't answered profcolli's question!