Unable to write "The Illusionist"

[armytoys]

I just recently tried to burn the Illusionist and the copying went just as normal (compressed 36%) but then when it went to write to disk the disk kicked out and an error came up asking to insert media with enough storage capacity for the file - it said I needed 4.42 mb and the disk I was using was 4.7mb - I switched disks a few then switched brands - still didn't work - any suggestions? My firmware is up to date - I am using a Plextor 740a DvdR - I am certain there is nothing wrong with the blank media I am using. The software I use in conjuction with Anydvd is Click 1 - it has always worked well - even thru all the other movies other people have trouble with. Please help - I really want this movie

[TPLAT]

I just recently tried to burn the Illusionist and the copying went just as normal (compressed 36%) but then when it went to write to disk the disk kicked out and an error came up asking to insert media with enough storage capacity for the file - it said I needed 4.42 mb and the disk I was using was 4.7mb - I switched disks a few then switched brands - still didn't work - any suggestions? My firmware is up to date - I am using a Plextor 740a DvdR - I am certain there is nothing wrong with the blank media I am using. The software I use in conjuction with Anydvd is Click 1 - it has always worked well - even thru all the other movies other people have trouble with. Please help - I really want this movie

Open 1Click and press your F8-key then copy and paste the log for it. Look for where the logs starts and ends. Blank media may say 4.7gb but actualy recording space available is 4.3gb.


****session closed****

everything in between these two lines will be one log.


****session started****

[armytoys]

I just recently tried to burn the Illusionist and the copying went just as normal (compressed 36%) but then when it went to write to disk the disk kicked out and an error came up asking to insert media with enough storage capacity for the file - it said I needed 4.42 mb and the disk I was using was 4.7mb - I switched disks a few then switched brands - still didn't work - any suggestions? My firmware is up to date - I am using a Plextor 740a DvdR - I am certain there is nothing wrong with the blank media I am using. The software I use in conjuction with Anydvd is Click 1 - it has always worked well - even thru all the other movies other people have trouble with. Please help - I really want this movie
How do I get it to compress enough to be able to copy it??????

[TPLAT]

How do I get it to compress enough to be able to copy it??????

Post your log for that movie and it will give a better idea as to what your problem is and will answer a bunch of questions in one shot. I have that movie and had no problems backing it up.

[armytoys]

I am using Any DVD and 1 Click - when my file goes to write the meida storage capicity isn't high enough - how do I get my file to compress enough to be able to write it - is this a 1 click problem??

[DetroitBaseball]

I am using Any DVD and 1 Click - when my file goes to write the meida storage capicity isn't high enough - how do I get my file to compress enough to be able to write it - is this a 1 click problem??
Sounds like it to me. AnyDVD just decrypts.

[armytoys]

I am going to rip it and then post the log.....

[TPLAT]

I am going to rip it and then post the log.....

I didnt have to rip it. Like asked post your log, its the quickest way to answer a bunch of questions one time.
Already burning the movie and no problem.

[Webslinger]

is this a 1 click problem??

I'll say this much: it's not an Anydvd issue. Period.

[TPLAT]

Just backed it up with the current version of AnyDvd and 1Click without any problems. No playback problems as well.

2/5/2007 9:03:30 PM info F8 key click: Open temporary log file
2/5/2007 9:03:28 PM info Folder "C:\Documents and Settings\Tom P\Local Settings\Application Data\1Click DVD Copy\Temp" deleted
2/5/2007 8:58:32 PM info Copy completed.
2/5/2007 8:58:32 PM info Finalization Time 00:00:12 - Total completion time 00:13:58
2/5/2007 8:58:19 PM info Write finished in 00:13:45 - Finalization start here. Avg. burn rate 4.40
2/5/2007 8:44:33 PM info Lead-in burning time (mS) 28
2/5/2007 8:44:33 PM info Write started 2234144 sectors to write
2/5/2007 8:44:33 PM info Writing speed requested x4.0, effective x4.0
2/5/2007 8:44:33 PM info Format completed
2/5/2007 8:44:16 PM info Format start
2/5/2007 8:44:16 PM info Available write speed: 4x, 2.4x
2/5/2007 8:44:16 PM info Media ID: MKM-A02-00
2/5/2007 8:44:16 PM info DMA Enabled
2/5/2007 8:44:16 PM info Scanned files #34, folder #2 - total size 4574351360 b. (4.26 Gb.)
2/5/2007 8:44:16 PM info Inserted media type : DVD+RW
2/5/2007 8:44:15 PM info Write started
2/5/2007 8:44:14 PM info Volume name: THEILLUSIONIST_D2
2/5/2007 8:44:14 PM info Source path for burning "C:\Documents and Settings\Tom P\Local Settings\Application Data\1Click DVD Copy\Temp\THEILLUSIONIST_D2\VIDEO_TS"
2/5/2007 8:44:11 PM info New media inserted. Burning layer is ready to write
2/5/2007 8:43:48 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2/5/2007 8:43:48 PM info New Drive selected : 3:1:0 - TSSTcorp CD/DVDW SH-S183L SB01 [H] (Ide)
2/5/2007 8:43:47 PM info IFO reallocation not required
2/5/2007 8:43:47 PM info Preparing to burn
2/5/2007 8:43:47 PM info Transcoding finished
2/5/2007 8:43:47 PM info Transcoding time: 0:13:34
2/5/2007 8:30:10 PM info Transcoding started...
2/5/2007 8:30:10 PM info Working Folder has "131480 Mb." of free space
2/5/2007 8:30:10 PM info Working Folder : C:\Documents and Settings\Tom P\Local Settings\Application Data\1Click DVD Copy
2/5/2007 8:30:10 PM info Destination : [H] TSSTcorp CD/DVDW SH-S183L SB01 (Ide)
2/5/2007 8:30:10 PM info Source size : 7.3728 GB
2/5/2007 8:30:10 PM info Source : [J] Optiarc DVD RW AD-7170A 1.02 (Scsi)
2/5/2007 8:30:10 PM info Destination Drive H: - DMA is enabled
2/5/2007 8:30:10 PM info Source Drive J: - DMA status unknown (not an IDE drive)
2/5/2007 8:30:10 PM info Enable media stats collection - VSO: FALSE
2/5/2007 8:30:10 PM info Turn off computer after burn: FALSE
2/5/2007 8:30:10 PM info Delete working folder after successful burn: TRUE
2/5/2007 8:30:10 PM info Warn before erasing RW media: FALSE
2/5/2007 8:30:10 PM info Allow DVD tray eject: TRUE
2/5/2007 8:30:10 PM info Prompt for another copy of the same source: TRUE
2/5/2007 8:30:10 PM info Preferred Burn Speed: x8
2/5/2007 8:30:10 PM info Prefer DVDR SAO: TRUE
2/5/2007 8:30:10 PM info Save Episodes or Extras option setting: FALSE
2/5/2007 8:30:10 PM info DVD-R Write Mode: Prefer SAO
2/5/2007 8:30:10 PM info Dual Layer Media: FALSE
2/5/2007 8:30:10 PM info Movie Only Menus: TRUE
2/5/2007 8:30:10 PM info Keep Subtitles: TRUE
2/5/2007 8:30:10 PM info Prefer DTS Audio: FALSE
2/5/2007 8:30:10 PM info All Languages: FALSE
2/5/2007 8:30:10 PM info Extras or Episodes: TRUE
2/5/2007 8:30:10 PM info Show Hint popups: TRUE
2/5/2007 8:30:10 PM info START button clicked
2/5/2007 8:30:06 PM info Setting change: Save Episodes or Extras option setting: FALSE
2/5/2007 8:30:02 PM info Setting change: Preferred Burn Speed: x8
2/5/2007 8:29:34 PM info Estimated Required Compression: 41%
2/5/2007 8:29:34 PM info Titleset 7 - Audio 1: English (Dolby AC-3 2ch 48Kbps DRC normal) (ID: 0x80)
2/5/2007 8:29:34 PM info Titleset 6 - Audio 1: English (Dolby AC-3 2ch 48Kbps DRC normal) (ID: 0x80)
2/5/2007 8:29:34 PM info Titleset 5 - Audio 1: English (Dolby AC-3 6ch 48Kbps DRC normal) (ID: 0x80)
2/5/2007 8:29:34 PM info Titleset 3 - Audio 2: English (Dolby AC-3 2ch 48Kbps DRC director's comments) (ID: 0x81)
2/5/2007 8:29:34 PM info Titleset 3 - Audio 1: English (Dolby AC-3 6ch 48Kbps DRC normal) (ID: 0x80)
2/5/2007 8:29:34 PM info Titleset 2 - Audio 1: English (Dolby AC-3 2ch 48Kbps DRC normal) (ID: 0x80)
2/5/2007 8:29:34 PM info Titleset 1 - Audio 1: English (Dolby AC-3 2ch 48Kbps DRC normal) (ID: 0x80)
2/5/2007 8:29:34 PM info Preferred Audio Language : english
2/5/2007 8:29:34 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2/5/2007 8:29:34 PM info New Drive selected : 3:1:0 - TSSTcorp CD/DVDW SH-S183L SB01 [H] (Ide)
2/5/2007 8:29:34 PM info Volume name: THEILLUSIONIST_D2
2/5/2007 8:29:34 PM info Scanning source files - a new DVD or change to settings...
2/5/2007 8:29:29 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2/5/2007 8:29:29 PM info New Drive selected : 3:1:0 - TSSTcorp CD/DVDW SH-S183L SB01 [H] (Ide)
2/5/2007 8:29:29 PM info Destination found in registry: [H] TSSTcorp CD/DVDW SH-S183L SB01 (Ide)
2/5/2007 8:29:29 PM info Source found in registry: [J] Optiarc DVD RW AD-7170A 1.02 (Scsi)
2/5/2007 8:29:29 PM info CPRx error correction enabled : FALSE
2/5/2007 8:29:29 PM info PATIN COUFFIN : 1.37.0.0
2/5/2007 8:29:29 PM info BOUDUCON : 1.6.2.134
2/5/2007 8:29:29 PM info VSO_HWE : 2.0.22.272
2/5/2007 8:29:29 PM info DVD2DVD : 5.4.0.7
2/5/2007 8:29:29 PM info AnyDVD SafeMode: FALSE
2/5/2007 8:29:29 PM info AnyDVD : 6.1.1.4
2/5/2007 8:29:29 PM info AnyDVD process detected
2/5/2007 8:29:29 PM info [L] BENQ DVD DD DW1650 BCDC (Scsi)
2/5/2007 8:29:29 PM info [K] LITE-ON DVDRW LH-20A1H LL06 (Scsi)
2/5/2007 8:29:29 PM info [J] Optiarc DVD RW AD-7170A 1.02 (Scsi)
2/5/2007 8:29:29 PM info [I] HL-DT-ST DVD-RAM GSA-H22N 1.01 (Scsi)
2/5/2007 8:29:29 PM info [H] TSSTcorp CD/DVDW SH-S183L SB01 (Ide)
2/5/2007 8:29:29 PM info [G] LITE-ON DVDRW SH-16A7S WS04 (Ide)
2/5/2007 8:29:29 PM info [F] PLEXTOR DVDR PX-716A 1.10 (Ide)
2/5/2007 8:29:29 PM info [E] TSSTcorp CD/DVDW SH-S182D SB04 (Ide)
2/5/2007 8:29:29 PM info [D] HL-DT-ST DVDRAM GSA-H12N UJ12 (Ide)
2/5/2007 8:29:29 PM info Loading reader listbox
2/5/2007 8:29:29 PM info [J] Optiarc DVD RW AD-7170A 1.02 (Scsi)
2/5/2007 8:29:29 PM info [K] LITE-ON DVDRW LH-20A1H LL06 (Scsi)
2/5/2007 8:29:29 PM info [I] HL-DT-ST DVD-RAM GSA-H22N 1.01 (Scsi)
2/5/2007 8:29:29 PM info [L] BENQ DVD DD DW1650 BCDC (Scsi)
2/5/2007 8:29:29 PM info [H] TSSTcorp CD/DVDW SH-S183L SB01 (Ide)
2/5/2007 8:29:29 PM info [E] TSSTcorp CD/DVDW SH-S182D SB04 (Ide)
2/5/2007 8:29:29 PM info [F] PLEXTOR DVDR PX-716A 1.10 (Ide)
2/5/2007 8:29:29 PM info [G] LITE-ON DVDRW SH-16A7S WS04 (Ide)
2/5/2007 8:29:29 PM info [D] HL-DT-ST DVDRAM GSA-H12N UJ12 (Ide)
2/5/2007 8:29:29 PM info Loading writer listbox
2/5/2007 8:29:29 PM info Burning engine : VSO SDK
2/5/2007 8:29:29 PM info Update Notification enabled : FALSE
2/5/2007 8:29:29 PM info User default language : 1033 (0x0409h) - English (United States)
2/5/2007 8:29:29 PM info System default language : 1033 (0x0409h) - English (United States)
2/5/2007 8:29:29 PM info Version 5.1.1.5
2/5/2007 8:29:29 PM info ExeName : "C:\Program Files\LG Software Innovations\1Click DVD Copy 5\1ClickDvdCopy.exe"
2/5/2007 8:29:29 PM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)

[sweeney2007]

well the best way if you use 1click is to rip it to the harddrive then re-rip it. Or you could use shrink but clonedvd is recommended. 1click has done this to me many times in the past.

[armytoys]

OK -

I guess I am computer illiterate - I tried f8 but the only log I get is my last one for the guardian - it is not loggin anything on the Illusionist

[TPLAT]

I'll say this much: it's not an Anydvd issue. Period.

I`m not saying its an AnyDvd issue, it could be a number of other things like not an upto date version of 1Click. The reason I asked for a log is that it provide alot of info at one time, such as what version of 1Click the person is using, what version of AnyDvd their using etc...

[armytoys]

here is from yesterday -

2/4/2007 7:02:05 PM info START button pressed ****************************
2/4/2007 4:32:16 PM info Burning started
2/4/2007 4:30:16 PM info Burning started
2/4/2007 4:30:16 PM info Preparing to burn
2/4/2007 4:30:16 PM info Transcoding finished
2/4/2007 4:09:57 PM info Transcoding started
2/4/2007 4:09:57 PM info Audio Enabled : Audio 1: English (Dolby AC-3 6ch 48Kbps DRC normal) (ID: 0x80)
2/4/2007 4:09:57 PM info Audio Language : english
2/4/2007 4:09:57 PM info Include Extras : False
2/4/2007 4:09:57 PM info Free hard disk space : 15.6131 GB
2/4/2007 4:09:56 PM info Dual Layer : False
2/4/2007 4:09:56 PM info Movie Only Menus : False
2/4/2007 4:09:56 PM info Include Subtitles : False
2/4/2007 4:09:56 PM info DTS Audio : False
2/4/2007 4:09:56 PM info All Languages : False
2/4/2007 4:09:56 PM info IncludeExtras : False
2/4/2007 4:09:56 PM info Working Folder : C:\Documents and Settings\Susan Flores\Application Data\1ClickDVDCopy\
2/4/2007 4:09:56 PM info Destination : 1:1:0 - PLEXTOR DVDR PX-740A 1.02 [E] (Ide)
2/4/2007 4:09:56 PM info Volume Name : THEILLUSIONIST_D2
2/4/2007 4:09:56 PM info Source : 1:0:0 - SAMSUNG DVD-ROM SD-616T F306 [D] (Ide)
2/4/2007 4:09:56 PM info Source size : 7.3734 GB
2/4/2007 4:09:56 PM info START button pressed ****************************
2/4/2007 4:09:12 PM info Burning engine : COPYTODVD
2/4/2007 4:09:12 PM info PCSETUP : 1.35.6.91
2/4/2007 4:09:12 PM info BOUDUCON : 1.6.2.132
2/4/2007 4:09:12 PM info VSO_HWE : 2.0.13.249
2/4/2007 4:09:12 PM info DVD2DVD : 5.0.0.10 - D41D
2/4/2007 4:09:12 PM info User default language : 1033 (0x0409h) - English (United States)
2/4/2007 4:09:12 PM info System default language : 1033 (0x0409h) - English (United States)
2/4/2007 4:09:12 PM info Version 4.2.9.2
2/4/2007 4:09:12 PM info ExeName : "C:\Program Files\LG Software Innovations\1Click DVD Copy 4.2\1ClickDvdCopy.exe"
2/4/2007 4:09:12 PM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
2/4/2007 4:02:58 PM info ******************** Report session closed *********************
2/4/2007 4:01:53 PM info Burning started
2/4/2007 3:15:39 PM info Burning started
2/4/2007 3:15:39 PM info Preparing to burn
2/4/2007 3:15:39 PM info Transcoding finished
2/4/2007 2:47:21 PM info Transcoding started
2/4/2007 2:47:21 PM info Audio Enabled : Audio 1: English (Dolby AC-3 6ch 48Kbps DRC normal) (ID: 0x80)
2/4/2007 2:47:21 PM info Audio Language : english
2/4/2007 2:47:21 PM info Include Extras : False
2/4/2007 2:47:21 PM info Free hard disk space : 15.6040 GB
2/4/2007 2:47:21 PM info Dual Layer : False
2/4/2007 2:47:21 PM info Movie Only Menus : False
2/4/2007 2:47:21 PM info Include Subtitles : False
2/4/2007 2:47:21 PM info DTS Audio : False
2/4/2007 2:47:21 PM info All Languages : False
2/4/2007 2:47:21 PM info IncludeExtras : False
2/4/2007 2:47:21 PM info Working Folder : C:\Documents and Settings\Susan Flores\Application Data\1ClickDVDCopy\
2/4/2007 2:47:21 PM info Destination : 1:1:0 - PLEXTOR DVDR PX-740A 1.02 [E] (Ide)
2/4/2007 2:47:21 PM info Volume Name : THEILLUSIONIST_D2
2/4/2007 2:47:21 PM info Source : 1:0:0 - SAMSUNG DVD-ROM SD-616T F306 [D] (Ide)
2/4/2007 2:47:21 PM info Source size : 7.3734 GB

[Webslinger]

I`m not saying its an AnyDvd issue

I wasn't responding to you. If you refer to my post, I'm responding to the OP, who created two threads about the exact same subject in the Anydvd forum, when this issue has nothing to do with Anydvd. I have merged them into one thread--here.

And I also appreciate from reading numerous posts on several forums that 1-Click and Anydvd (if they are the latest versions) have no problems with this title. But the OP's problem is solved with 1-Click--and not Anydvd. That is all I meant. My apologies if I offended anyone. And you have my sincere gratitude for attempting to helping out the OP. Thank you.

[TPLAT]

OK -

I guess I am computer illiterate - I tried f8 but the only log I get is my last one for the guardian - it is not loggin anything on the Illusionist

Close out 1Click and then open it again then press your F8-key and then copy and paste the 1Click info, it will give us some info to go on. It should look something like mine below.

2/5/2007 9:11:26 PM info F8 key click: Open temporary log file
2/5/2007 9:11:24 PM info New media inserted. Burning layer is ready to write
2/5/2007 9:11:22 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2/5/2007 9:11:22 PM info New Drive selected : 3:1:0 - TSSTcorp CD/DVDW SH-S183L SB01 [H] (Ide)
2/5/2007 9:11:22 PM info Destination found in registry: [H] TSSTcorp CD/DVDW SH-S183L SB01 (Ide)
2/5/2007 9:11:22 PM info Source found in registry: [J] Optiarc DVD RW AD-7170A 1.02 (Scsi)
2/5/2007 9:11:22 PM info CPRx error correction enabled : FALSE
2/5/2007 9:11:22 PM info PATIN COUFFIN : 1.37.0.0
2/5/2007 9:11:22 PM info BOUDUCON : 1.6.2.134
2/5/2007 9:11:22 PM info VSO_HWE : 2.0.22.272
2/5/2007 9:11:22 PM info DVD2DVD : 5.4.0.7
2/5/2007 9:11:22 PM info AnyDVD SafeMode: FALSE
2/5/2007 9:11:22 PM info AnyDVD : 6.1.1.4
2/5/2007 9:11:22 PM info AnyDVD process detected
2/5/2007 9:11:22 PM info [L] BENQ DVD DD DW1650 BCDC (Scsi)
2/5/2007 9:11:22 PM info [K] LITE-ON DVDRW LH-20A1H LL06 (Scsi)
2/5/2007 9:11:22 PM info [J] Optiarc DVD RW AD-7170A 1.02 (Scsi)
2/5/2007 9:11:22 PM info [I] HL-DT-ST DVD-RAM GSA-H22N 1.01 (Scsi)
2/5/2007 9:11:22 PM info [H] TSSTcorp CD/DVDW SH-S183L SB01 (Ide)
2/5/2007 9:11:22 PM info [G] LITE-ON DVDRW SH-16A7S WS04 (Ide)
2/5/2007 9:11:22 PM info [F] PLEXTOR DVDR PX-716A 1.10 (Ide)
2/5/2007 9:11:22 PM info [E] TSSTcorp CD/DVDW SH-S182D SB04 (Ide)
2/5/2007 9:11:22 PM info [D] HL-DT-ST DVDRAM GSA-H12N UJ12 (Ide)
2/5/2007 9:11:22 PM info Loading reader listbox
2/5/2007 9:11:22 PM info [J] Optiarc DVD RW AD-7170A 1.02 (Scsi)
2/5/2007 9:11:22 PM info [K] LITE-ON DVDRW LH-20A1H LL06 (Scsi)
2/5/2007 9:11:22 PM info [I] HL-DT-ST DVD-RAM GSA-H22N 1.01 (Scsi)
2/5/2007 9:11:22 PM info [L] BENQ DVD DD DW1650 BCDC (Scsi)
2/5/2007 9:11:22 PM info [H] TSSTcorp CD/DVDW SH-S183L SB01 (Ide)
2/5/2007 9:11:22 PM info [E] TSSTcorp CD/DVDW SH-S182D SB04 (Ide)
2/5/2007 9:11:22 PM info [F] PLEXTOR DVDR PX-716A 1.10 (Ide)
2/5/2007 9:11:22 PM info [G] LITE-ON DVDRW SH-16A7S WS04 (Ide)
2/5/2007 9:11:22 PM info [D] HL-DT-ST DVDRAM GSA-H12N UJ12 (Ide)
2/5/2007 9:11:22 PM info Loading writer listbox
2/5/2007 9:11:22 PM info Burning engine : VSO SDK
2/5/2007 9:11:21 PM info Update Notification enabled : FALSE
2/5/2007 9:11:21 PM info User default language : 1033 (0x0409h) - English (United States)
2/5/2007 9:11:21 PM info System default language : 1033 (0x0409h) - English (United States)
2/5/2007 9:11:21 PM info Version 5.1.1.52/5/2007 9:11:21 PM info ExeName : "C:\Program Files\LG Software Innovations\1Click DVD Copy 5\1ClickDvdCopy.exe"
2/5/2007 9:11:21 PM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
2/5/2007 9:11:21 PM info ******************** Report session started ********************

[armytoys]

I propbably do need to up date 1click - it has been 1 year - is the $19 upgrade sufficient?? I do coppy a lot of episode dvd's

[armytoys]

here it is

2/5/2007 11:13:51 PM info ******************** Report session closed *********************
2/5/2007 11:07:03 PM info Burning started
2/5/2007 11:07:03 PM info Preparing to burn
2/5/2007 11:07:03 PM info Transcoding finished
2/5/2007 10:38:33 PM info Transcoding started
2/5/2007 10:38:32 PM info Audio Enabled : Audio 1: English (Dolby AC-3 6ch 48Kbps DRC normal) (ID: 0x80)
2/5/2007 10:38:32 PM info Audio Language : english
2/5/2007 10:38:32 PM info Include Extras : False
2/5/2007 10:38:32 PM info Free hard disk space : 16.0655 GB
2/5/2007 10:38:32 PM info Dual Layer : False
2/5/2007 10:38:32 PM info Movie Only Menus : False
2/5/2007 10:38:32 PM info Include Subtitles : False
2/5/2007 10:38:32 PM info DTS Audio : False
2/5/2007 10:38:32 PM info All Languages : False
2/5/2007 10:38:32 PM info IncludeExtras : False
2/5/2007 10:38:32 PM info Working Folder : C:\Documents and Settings\Susan Flores\Application Data\1ClickDVDCopy\
2/5/2007 10:38:32 PM info Destination : 1:1:0 - PLEXTOR DVDR PX-740A 1.01 [E] (Ide)
2/5/2007 10:38:32 PM info Volume Name : THEILLUSIONIST_D2
2/5/2007 10:38:32 PM info Source : 1:0:0 - SAMSUNG DVD-ROM SD-616T F306 [D] (Ide)
2/5/2007 10:38:32 PM info Source size : 7.3734 GB
2/5/2007 10:38:32 PM info START button pressed ****************************
2/5/2007 10:38:14 PM info START button pressed ****************************
2/5/2007 10:23:28 PM info Burning engine : COPYTODVD
2/5/2007 10:23:28 PM info PCSETUP : 1.35.6.91
2/5/2007 10:23:28 PM info BOUDUCON : 1.6.2.132
2/5/2007 10:23:28 PM info VSO_HWE : 2.0.13.249
2/5/2007 10:23:28 PM info DVD2DVD : 5.0.0.10 - D41D
2/5/2007 10:23:28 PM info User default language : 1033 (0x0409h) - English (United States)
2/5/2007 10:23:28 PM info System default language : 1033 (0x0409h) - English (United States)
2/5/2007 10:23:28 PM info Version 4.2.9.2
2/5/2007 10:23:28 PM info ExeName : "C:\Program Files\LG Software Innovations\1Click DVD Copy 4.2\1ClickDvdCopy.exe"
2/5/2007 10:23:28 PM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
2/5/2007 8:37:10 PM info ******************** Report session closed ****

[TPLAT]

OK, I thought you were using a more current version for the log, try pressing your F7-key with 1click open, I havent used that version in quite a while. By the way i noticed that your Plextor 740A is really behind on firmware updates, the current firmware version for your Plextor 740A is 1.11 and yours is 1.01, give me a minute or two to check on something here.


http://forum.rpc1.org/dl_firmware.php?download_id=2038

[TPLAT]

The last version 4 was version 4.2.9.13 which I can email to you if you want to try that with AnyDvd, there are still some users who use that with AnyDvd. If you want to upgrade to the latest version 5 and you purchased 1Click over a year ago then it would cost you $19.00.

[armytoys]

after f7
2/5/2007 11:07:12 PM info ******************** Report session closed *********************
2/5/2007 11:07:11 PM error Write process cancelled during media detection
2/5/2007 11:07:06 PM info Media has been found ready but media test has failed. Starting poll mode
2/5/2007 11:07:05 PM info Opening tray: media (DVD-R) doesn't have enough free sectors (2318462 required, 2298496 Available, 39 Mb. missing)
2/5/2007 11:07:05 PM info Finished browsing files - Data size 4.42 Gb.
2/5/2007 11:07:05 PM info File scan complete: 10 files, 3 directories
2/5/2007 11:07:05 PM info Start Browsing file structures
2/5/2007 11:07:05 PM info IDE Controler manufacturer : Intel
2/5/2007 11:07:05 PM info IDE Controler Description : Intel(r) 82801BA Bus Master IDE Controller
2/5/2007 11:07:05 PM info Location : PCI bus 0, device 31, function 1
2/5/2007 11:07:05 PM info Support Media : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2/5/2007 11:07:05 PM info Writing device used : 1:1:0 - PLEXTOR DVDR PX-740A 1.01 [E] (Ide)
2/5/2007 11:07:05 PM info Using Patin-Couffin driver Version 1.35, Internal revision 35 - Async. Access mode
2/5/2007 11:07:05 PM info Using DVD Video creation mode.
2/5/2007 11:07:05 PM info ParamStr 5 = "/1C=4.2.9.2-D41D"
2/5/2007 11:07:05 PM info ParamStr 4 = "/volumename=THEILLUSIONIST_D2"
2/5/2007 11:07:05 PM info ParamStr 3 = "/dvdvideo=C:\Documents and Settings\Susan Flores\Application Data\1ClickDVDCopy\1ClickDvdCopy\VIDEO_TS"
2/5/2007 11:07:05 PM info ParamStr 1 = "/writedevice=E"
2/5/2007 11:07:05 PM info ParamStr 0 = "C:\PROGRA~1\LGSOFT~1\1CLICK~1.2\CopyToCd.exe"
2/5/2007 11:07:05 PM info User default language : 1033 (0x0409h) - English (United States)
2/5/2007 11:07:05 PM info System default language : 1033 (0x0409h) - English (United States)
2/5/2007 11:07:05 PM info Version 3.1.1.135
2/5/2007 11:07:05 PM info ExeName : "C:\PROGRA~1\LGSOFT~1\1CLICK~1.2\CopyToCd.exe"
2/5/2007 11:07:05 PM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
2/5/2007 11:07:05 PM info 32 bits native system
2/5/2007 11:07:05 PM info ******************** Report session started **

[armytoys]

yeah you can email me -

[armytoys]

do you think I should update my firmware to the 1.11? I don't want to screw anything up

[TPLAT]

yeah you can email me -

Yeah I can do that just send me your email address in a PM, I wouldnt be posting it on an open forum, also I suggest that you update your burners firmware.

[TPLAT]

Email sent. If you have the seperate vserion of CopyToDvd installed you may want to uninstall it. I just reinstalled that version and am going to check out a few things that i may have forgotten that may be of more help to you, will be back in a minute or so.

[armytoys]

I had already tried installing before I got yor message about uninstalling the older version. - I will try that now

[TPLAT]

OK, right down your registration number first if you havent saved it somewhere else also a few other things that you may want to write down for reference is your F3-key will turn on or off CPRX, with AnyDvd I would turn it off, F7-key to open your 1Click log, F8-key to open your CopyToDvd burn log, F9-key to open your CopyToDvd properties and F2-key to open the registration window.

[armytoys]

I have installed the update - I am trying to burn it now - I didn't turn off CPRX but will if it doesn't work -

Is there a faster way to burn dvd's that pushing start on 1click and letting it do it's thing for 25 minutes? I thought I had read you can copy a file to the desktop - honestly I need baby steps thru that but would love to do this faster if it doesn't compromise quality

[TPLAT]

I have installed the update - I am trying to burn it now - I didn't turn off CPRX but will if it doesn't work -

Is there a faster way to burn dvd's that pushing start on 1click and letting it do it's thing for 25 minutes? I thought I had read you can copy a file to the desktop - honestly I need baby steps thru that but would love to do this faster if it doesn't compromise quality

Ok, but after this burn I would turn it off, it was designed to work with Dvd43(sucks!), with AnyDvd you dont need it and it can cause a problem with some movies. A couple of other things I would do is for burning speed I would burn at half your medias rated burn speed, for example if using 16X media I would burn at 8X and if using 8X media I would burn at 4X. The one thing I like about the newer version 5 of 1click is that everything is now consilidated into the 1Click program, no need to open up the CopyToDvd properties to make changes, you just right click on the 1Click screen.

[armytoys]

TPLAT -

I looked on that website you posted for firmware and my firmware is up to date - I am using 1.01 but do have 1.02 installed - I just need to run it - the 1.11 is for the PX 704A - thanks for the website!

[TPLAT]

I have installed the update - I am trying to burn it now - I didn't turn off CPRX but will if it doesn't work -

Is there a faster way to burn dvd's that pushing start on 1click and letting it do it's thing for 25 minutes? I thought I had read you can copy a file to the desktop - honestly I need baby steps thru that but would love to do this faster if it doesn't compromise quality

I`ll send you an email to a site that has a 1Click tutorial.

[TPLAT]

TPLAT -

I looked on that website you posted for firmware and my firmware is up to date - I am using 1.01 but do have 1.02 installed - I just need to run it - the 1.11 is for the PX 704A - thanks for the website!

Ok, sorry about that i looked at the model number on that website to quickly, my bad.