Problems with anydvd and clone DVD

[Dgafchick]

I've been using both clone DVD and anydvd for 2 years now and it worked fine but now for at least the past couples months every DVD I try to burn will burn but it skips does anyone know how I can fix this problem?

[Frank]

It is not an AnyDVD issue in any event and only indirectly does it have to do with CloneDVD

This is always an environmental issue.

1. Your burner has taken a dislike to the blanks you are using,
2. Its efficiency has degraded
3. you burned at too high a speed for 1 and/or 2
4. In some rare occasions an anti-virus product may interfere

If this is with CloneDVD, try setting the "preferred speed" on the output
method panel to 4x. That usually will work.

[Dgafchick]

Thanks I'll try to change the speed cause I bought a new burner and it does the same thing and I always use the same disks so I'll try changing the speed thanks again

[Adbear]

And what brand of discs are they?

[Dgafchick]

Theyre memorex DVD+r

[Dgafchick]

I tried slowing down the speed and it helped a little but it still does it....

[FurryGuy]

Originally Posted by Dgafchick

Theyre memorex DVD+r

No wonder you are having problems. Memorex was never a quality brand, and lately they have been producing real junky blanks. Both single and dual layer blanks.

Verbatim DatalifePlus or Taiyo Yuden/JVC are the brand blanks to go for, especially if they are manufactured in Singapore. Yes, they are more expensive, but when you are repeatedly creating coasters with a cheaper brand the wasted money adds up.

I used to think Memorex was ok until I went through 3 50-disc cake boxes of dual layer blanks, purchased over several months from 3 different outlets, that not a single disc burned successfully. The Q/A problems with Memorex is not an isolated, one-time problem. I began having problems with increasing number of bad discs well over a year ago, so it definitely is not a fluke with their quality control being bad.