Audio stops every few seconds with TMT5

[dm01]

Dear Slysoft Forum / Mr. James!
First of all thanks for this great software. I've had great success using it with MPC-HC and PowerDVD10. I especially love the 24p PAL speed-down for true cinema feeling.
Unfortunately i have a problem with TMT5 which i recently bought. From what i was able to extract from the forum the two should work together. But unfortunately they don't work for me

ReClock is loaded without problems. But during the movie audio stops every few seconds with Blu Rays (in fact there is about 70% silence and 30% audio). And with DVD's audio stops every now end then, somewhere between every 10-40 seconds. I've tried fiddling with various options to no avail. I've enabled the logging feature and spotted the following WARNING messages:
27.44s 000dd4 WARNING WasapiThread buffer underrun! Stop!
27.47s 0011ac WARNING Wave playback timeout
27.47s 0011ac StopAndClearAudioBuffer
27.47s 000dd4 WasapiThread stopped

On this very same system ReClock works flawlessly with MPC-HC and also with PowerDVD10. So the system should be fast enough. I also rarely see CPU usage >30% so this should be ok to. The system is using a nvidia GT520 card with CUDA disabled and onboard realtek sound if that matters. The CPU is an Intel Core i3 @3.10GHz.

Is there anything that i can try from my side? Would it help to post a complete log-file too? Maybe i'm just using a version of TMT5 that's too recent (Version: 5.3.1.146).

I will be very willing to try out any clues or patches.

tia

[James]

Originally Posted by dm01

Dear Slysoft Forum / Mr. James!
First of all thanks for this great software. I've had great success using it with MPC-HC and PowerDVD10. I especially love the 24p PAL speed-down for true cinema feeling.
Unfortunately i have a problem with TMT5 which i recently bought. From what i was able to extract from the forum the two should work together. But unfortunately they don't work for me

ReClock is loaded without problems. But during the movie audio stops every few seconds with Blu Rays (in fact there is about 70% silence and 30% audio). And with DVD's audio stops every now end then, somewhere between every 10-40 seconds. I've tried fiddling with various options to no avail. I've enabled the logging feature and spotted the following WARNING messages:
27.44s 000dd4 WARNING WasapiThread buffer underrun! Stop!
27.47s 0011ac WARNING Wave playback timeout
27.47s 0011ac StopAndClearAudioBuffer
27.47s 000dd4 WasapiThread stopped

On this very same system ReClock works flawlessly with MPC-HC and also with PowerDVD10. So the system should be fast enough. I also rarely see CPU usage >30% so this should be ok to. The system is using a nvidia GT520 card with CUDA disabled and onboard realtek sound if that matters. The CPU is an Intel Core i3 @3.10GHz.

Is there anything that i can try from my side? Would it help to post a complete log-file too? Maybe i'm just using a version of TMT5 that's too recent (Version: 5.3.1.146).

I will be very willing to try out any clues or patches.

tia

Try to keep Aero enabled during playback with TMT.

[dm01]

Originally Posted by James

Try to keep Aero enabled during playback with TMT.

Wow, enabling Aero worked perfectly. Thanks. Wouldn't have thought that it would be so easy

[Srenard27]

Originally Posted by James

Try to keep Aero enabled during playback with TMT.

Hello,
using TMT5, I noticed that it was impossible for me to use Vsync correctly with Aero disabled : the vsync position never reaches the target. With Aero enabled, no problem.
Best regards,
Sylvain