WriteDVD 10 11 W2 (Zonealarm caused this)

[samlar]

I started to get this last week again had been years since I had got it.
Was using the best dvds and tried everything that has been tried before. To include changing the writer, checking the memory, Changing my computers power supply and about every software thing I could do to include reloading windows twice. It turned out to be the latest zonealarm extreme program. I could turn off zonealarm and I could burn fine turn it on and Writedvd 10 11 w2
I also could not complete a nero burn its log would say something about a memory problem. Zonealarm was not updating or running a check for virus at the time either. I did a clean uninstall of zonealarm reloaded clonedvd again and went back a few loads on zonealarm extreme and it worked. I am now up to the zonealarm 9.0.108 and it is fine. Have not went to the latest. 9.0.104 but I think it will work fine also I think it was something to do with the install of latest zonealarm extreme that caused the problem. Going to wait a while before reloading 9.0.104 just in case. My computer is not a slow computer either.

Operating System System Model
Windows XP Professional Service Pack 3 (build 2600) Enclosure Type: Desktop
Processor a Main Circuit Board b
2.60 gigahertz AMD Athlon 64 X2 Dual Core
128 kilobyte primary memory cache
512 kilobyte secondary memory cache Board: C51GM-M
Bus Clock: 201 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 08/28/2007
Drives Memory Modules c,d
500.11 Gigabytes Usable Hard Drive Capacity
175.88 Gigabytes Hard Drive Free Space

PIONEER DVD-RW DVR-111L [CD-ROM drive]
3.5" format removeable media [Floppy drive]

Generic USB CF Reader USB Device [Hard drive] -- drive 2
Generic USB MS Reader USB Device [Hard drive] -- drive 4
Generic USB SD Reader USB Device [Hard drive] -- drive 1
Generic USB SM Reader USB Device [Hard drive] -- drive 3
WDC WD5000AAKS-75A7B0 [Hard drive] (500.11 GB) -- drive 0 3456 Megabytes Installed Memory

Slot 'A0' has 2048 MB
Slot 'A1' has 2048 MB
Slot 'A2' is Empty
Slot 'A3' is Empty
Was using a pioneer d116 changed it out to d111 trying to find the problem.


Just thought I would share this with you all.

[Frank]

Hi

I am VERY interested in this. Keep us informed as you move forward with this and I personally appreciate your sharing this piece of information with us.
Thanks.

[Webslinger]

Originally Posted by samlar

Just thought I would share this with you all.

Thanks for the feedback.

[samlar]

did notice that in the registry it had AFS2K added to the lower filters and it did not have this until I removed zonelarm and reinstalled clonedvd going to move back to the latest zonealarm and see what happens. do not know what AFS2k does.

[mike_r]

Originally Posted by samlar

do not know what AFS2k does.

Search is your friend, see here.

AFS2K (system32\drivers\AFS2K.sys), Version: 3.1.21.0 (3.1.21.0)
Company: Oak Technology Inc.
Product: AFS
Copyright: Copyright (C) Oak Technology Inc.
Description: Audio File System
FileVersion: 3.1.21.1103
ProductVersion: 3.1.21.2(1103)
PrivateBuild: 3.1.21.2(1103)
SpecialBuild: Windows 2000/XP free build.

James, the developer of Anydvd, hates this filter. Typically it comes with HP software or as an Oak cd driver, and it may cause conflicts

[samlar]

More more more testing I know have a lot of copies of my xp disk slip steamed to sp3 along witha lot of disk that are no good. I found that if I updated to 9.0.114.000 for zonealarm the problem came back I also found that if I stopped the anitivirus part of zonealarm the problem was not there. I then found that all I had to do was go into zonealarm and turn of the riskware scanning and the problem went away. This was trying to burn with nero since it was doing it with both nero and clonedvd I picked nero for testing. I used zonealarm program to clean remove zonealarm and reinstalled and I noticed it did not cause a problem until I updated the antivirus. Not sure yet why that is so. It ask you if you want to do a scan after the update and I said no. I tried this twice as long as I loaded the program and started the burn before zonealarm did a update no problem burning. I even burned one while it was updating. I am not letting zonealarm do a complete scan and then going to test after that.
The new zonealarm combined the antivirus and the spyware into one. Did not have the problem with the old zonealarm with them split. here is a copy of a bad nero log.


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder: <PIONEER DVD-RW DVR-111L>Version: 8.29 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-111L>Version: 8.29 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD5000AAKS-75A7B0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111L atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111L F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 16 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.9.2009
CD-ROM (Boot)
5:13:48 AM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

5:13:48 AM #2 Text 0 File Burncd.cpp, Line 3012
PIONEER DVD-RW DVR-111L
Buffer underrun protection activated

5:13:48 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

5:13:48 AM #4 Text 0 File Reader.cpp, Line 124
Reader running

5:13:48 AM #5 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-111L running

5:13:48 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

5:13:50 AM #7 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using CD-R/RW media

5:13:51 AM #8 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 331142 ( 73:37.17)

5:13:51 AM #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

5:13:51 AM #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: PIONEER DVD-RW DVR-111L

5:13:51 AM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:13:51 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 331143 (331143) = #331143/73:35.18
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 331141 blocks [PIONEER DVD-RW DVR-111L]
--------------------------------------------------------------

5:13:51 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [PIONEER DVD-RW DVR-111L] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 678488064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
331143 | lead-out | 1 | 0x41 | 0x00

5:13:51 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 331143 -> 331141.

5:13:51 AM #15 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

5:13:51 AM #16 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

5:13:51 AM #17 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

5:13:51 AM #18 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

5:13:51 AM #19 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

5:13:51 AM #20 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 24x (3,600 KB/s)

5:13:51 AM #21 SPTI -1189 File SCSIPassThrough.cpp, Line 289
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 30 02
Buffer x03216400: Len x4000

5:13:51 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:13:52 AM #23 Text 0 File Mmc.cpp, Line 21840
Set BUFE: Buffer underrun protection -> ON

5:13:52 AM #24 Text 0 File Cdrdrv.cpp, Line 1200
05:13:52.328 - F: PIONEER DVD-RW DVR-111L : Queue again later

5:14:19 AM #25 SPTI -1047 File SCSIPassThrough.cpp, Line 289
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 02 60 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 02 60 0E 00 00 00 00 64
Buffer x039b0000: Len x10000
0x22 00 60 02 00 00 00 00 02 60 00 08 00 00 00 00
0x08 00 6D 09 1E 04 21 2D EC 02 00 00 01 00 00 01
0x01 00 22 00 5F 02 00 00 00 00 02 5F 00 08 00 00

5:14:19 AM #26 CDR -1047 File Writer.cpp, Line 311
Illegal mode for this track
F: PIONEER DVD-RW DVR-111L

5:14:19 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:14:19 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader



will get back when I have done more testing

[mike_r]

you should use the [ CODE] [ /CODE] tags (or use the ) to make your posts more readable.

[samlar]

Well have tried everything I had now replaced everything but the case and the amd processor and I am sure they are good. Wanted a new motherboard anyway. I even took another hard drive and installed nothing butwindows, clonedvd and anydvd along with zonealarm. Nothing and I mean nothing. I did update windows to sp3 but that was the only update. Wasted more cds and dvds I can only get burns if I turn off zonealarm antivirus and turn of its. On access scanning. I tried a pioneer 116,216 and 111 drives. This started with there new version seven zonealarm extreme. I am done wasting disk have opened a ticket with them but do not expect them to do much. This is what they told me to do in there last email

understand that you cannot burn CDs if the antivirus portion of ZoneAlarm is running.

Please open ZoneAlarm, click antivirus -> main, and then click the advanced options button.

Click exceptions, and add the affected file or folder to the exceptions list to see if this resolves this issue


So what did I do I put both clonedvd and anydvd in the exception list along with the folder that had the dvd files still did it.

Done wasting disk will just turn off there antivirus while burning and unless they fix it before my time is up I will go back to nortons antivirus. I am using
Taiyo Yuden Premium disk so I know it is not the disk and all my drives were working fine until the update to nine for zonealarm.

[Webslinger]

Originally Posted by samlar

I will go back to nortons antivirus

Do yourself a favour and switch to Eset. Here's a 10% off coupon code: http://www.eset.com/rome/

[samlar]

Ok I fixed the problem. This is going to take time to explain.

Fist I saw that the problem with Nero or Clonedvd was with the first part of the writing
I assume that writing the boot info. I fixed the Nero illegal mode this trak by going to zone alarm antivirus scan targets and unchecking the scan boot section for all drives. This did not fix the writedvd 10 11 w2 error that happens right as it started the write in Clonedvd.
To fix this I had to go to zone alarm antivirus advanced then exceptions and add the clonedvd.exe to the exceptions. Zone alarm has two select types for exceptions and they are trusted and on access.
I had placed the whole Clonedvd folder in the exceptions list for on access and it did not fix the problem. I placed the clonedvd.exe in the exceptions for on access and it did not fix the problem. I placed clonedvd.exe in the exceptions list for trusted and it fixed it. The difference is the trusted means the file will not be scanned with any scans, on access only excludes files from being scanned when they are opened .etc per zone alarm...
Nero illegal mode this trak

Uncheck boot sector scanning in zone alarm antivirus

Clonedvd

writedvd 10 11 w2 error

In zone alarm antivirus go to advanced exceptions and add clonedvd.exe as a selection type trusted process exception.

I still think the writedvd 10 11 w2 error at the start of Clonedvd is a timing error and for some reason clonedvd takes to long to start the write and that an antivirus program slows it down even more. Either that or what ever the part of the program that gives the writedvd 10 11 w2 error has to short of time limit. Since I am not a software writer I will leave that to Slysoft.