Dual Layer copying "Movie Only"

[tmckin1211]

I am sure I will get redirected for asking this question.

Why can not copy to a DVD+R Dual Layer Verbatim, using AnyDVD and CloneDVD "Movie Only". I have never been able to even though it says it burned successfully. It always pauses or locks up about midway on the movie. I have owned AnyDvd and CloneDvd for a couples of years and never successful made a disc that works. Is this my problem or a CloneDvd problem. I also keep my software up to date. Except the lastest beta version of CloneDvd which loops. I have read the manual which did not help me with the problem, I watch the forum, but the other members problem do not seem the same. I have to use a third party software which does use AnyDvd and is having problem with the new protection. I am stuck.

Redirect me if you must.

[Webslinger]

Originally Posted by tmckin1211

Except the lastest beta version of CloneDvd

That's the problem. You need to use 2.9.2.5. You also need to burn at 4x, and update your drive's firmware if possible. Also, ensure that you're bitsetting to "dvd-rom".

Also, why are you doing movie only on +R DL? You can fit everything on there.

[tmckin1211]

Originally Posted by Webslinger

That's the problem. You need to use 2.9.2.5. You also need to burn at 4x, and update your drive's firmware if possible. Also, ensure that you're bitsetting to "dvd-rom".

Also, why are you doing movie only on +R DL? You can fit everything on there.

Okay I will use 2.9.2.5 (Beta) update, I hate that it loops. I burn at 4X already and I update my firmware regularly.

Where do I set the bitsetting? Is that part of CloneDVD or my burner? If it is my burner where do you find it and once it set will it stay set or only use it when burning D/L?

I have a 56" LCD and a 2 hour movie compresses to about 76% and looks bad on the LCD so I use a D/L.

When I use the third party program you check DVD-Rom in the program.

[Webslinger]

Originally Posted by tmckin1211

Where do I set the bitsetting? Is that part of CloneDVD

No. Click http://forum.slysoft.com/showthread.php?t=476, and look at step 3.

or my burner? If it is my burner where do you find it

See above. It's more a function of your burner's firmware . . . Your burner's firmware needs to support bitsetting changes.

I have a 56" LCD and a 2 hour movie compresses to about 76% and looks bad on the LCD so I use a D/L.

Yeah, that still doesn't explain why you're not backing up everything as opposed to just the main movie. With +R DL you never have to compress no matter what.

[tmckin1211]

Originally Posted by Webslinger

No. Click http://forum.slysoft.com/showthread.php?t=476, and look at step 3.



See above. It's more a function of your burner's firmware . . . Your burner's firmware needs to support bitsetting changes.



Yeah, that still doesn't explain why you're not backing up everything as opposed to just the main movie.

Okay, I changed my burner DVD-ROM so quess it does not automatic detect. You were right it loses the setting everytime you reboot. I have a Samsung SH-S223Q. Is there a change you can recommend a burner that will automatcally go DVD-ROM? I had to use imgburn.

Do I have to change the Bitsetting on the reader burner as well?

I only copy the movie because I hate previews, trailers, special features and menus.

[Webslinger]

Originally Posted by tmckin1211

Okay, I changed my burner DVD-ROM so quess it does not automatic detect. You were right it loses the setting everytime you reboot. I have a Samsung SH-S223Q. Is there a change you can recommend a burner that will automatcally go DVD-ROM? I had to use imgburn.

MediaCodeSpeedEdit

Do I have to change the Bitsetting on the reader burner as well?

Burner only

[tmckin1211]

MediaCodeSpeedEdit if this is a link it is broken. Is this were you find the burner?

[Webslinger]

Originally Posted by tmckin1211

MediaCodeSpeedEdit if this is a link it is broken.

I guess the site is down or something

Is this were you find the burner?

No, it's the program you use to edit your burner's firmware, so that it's permanently set to change booktype to "dvd-rom" by default.

[tmckin1211]

That would be nice, I hope it not down for good.

Thanks for all your help, I have one thing I hate to do, download the Beta Version. I really hate looping.

[tmckin1211]

I downloaded MediaCodeSpeedEdit

I have idea what it asking me or were to find the information and of couse no directions.