Movie Only Copy Including Menus

[mike_r]

Yes, it's a limitation of mplayer. You can try a different build of mplayer to see if that helps, also you can try messing with the command line version to see what works on these m2ts for you. You can then add these options to your INI:

[MPLAYER]
PathToMplayer=D:\TVIX\Clown_BD BD Copier\Mplayer\Mplayer.exe
MplayerArgs=-zoom -framedrop -nosound -vo gl2 -loop 0
WaitForMPlayerWindow=10

[mike_r]

Originally Posted by DukeOfUrl

mike_r thanks for this (amazing) tool--I'm surprised it doesn't get more attention.

I don't push the tool too much, and it could be simply that it works for most people and they don't need to post in the forum.

[DukeOfUrl]

Originally Posted by mike_r

Yes, it's a limitation of mplayer.

Thanks for confirming. I tried latest 0.6.9, then I fiddled a bit with -vo. Finally found ConsoleWindowShow and set it to Y and it told me "Cannot read [video] properties" and "no stream found" so I suspect I am SOL so long as mplayer doesn't even know what these .m2ts are...

[landonfoot]

Hey everyone,

I'm just trying out ClownBD Copier for the first time and am running into an odd issue. When I choose the path to my Blu-ray drive and hit read, I can see the folder structure being searched but no results are displayed in the BDMV properties and structure panes. AnyDVD HD status shows that encryption was removed successfully. I am also able to view the structure using BDinfo and TSmuxer GUI successfully. I can also see the contents when using ClownBD, but I would like to use copier so that I can remove extras and languages, but keep the menus. I was able to rip the movie to an ISO with AnyDVD, mount it on another PC, and am able to read the contents with BD Copier correctly with the BDMV properties and structure being displayed properly. This leads me to believe that it is something else on my PC specifically preventing it from working properly, but for the life of me I can't figure out what it is. Any ideas???

I am using a Win7 64-bit machine.

Thanks,

Landon

[mike_r]

Make sure that it is the path to BDMV and not the \BDMV\ folder itselfm eg

OK : D:\ or D:\MyMovieRip\

Not OK: D:\BDMV\ or D:\MyMovieRip\BDMV\

[landonfoot]

Hi Mike,

Thank you for the suggestion. I did verify that my path is just E:\ which is my blu-ray drive. When I hit read, you can see on the bottom left hand side the application searching through the BDMV folder and can even see the files as it is scanning them, but when it is complete there is no output in the structure or properties pane. Even more strange, I can select HDD copy and it will even create the batch file and create the .iso. It just looks like there is something preventing it from displaying the structure in the app. I've attached a screenshot if that helps. Thanks again!

Landon

[owine]

Originally Posted by landonfoot

Hey everyone,

I'm just trying out ClownBD Copier for the first time and am running into an odd issue. When I choose the path to my Blu-ray drive and hit read, I can see the folder structure being searched but no results are displayed in the BDMV properties and structure panes. AnyDVD HD status shows that encryption was removed successfully. I am also able to view the structure using BDinfo and TSmuxer GUI successfully. I can also see the contents when using ClownBD, but I would like to use copier so that I can remove extras and languages, but keep the menus. I was able to rip the movie to an ISO with AnyDVD, mount it on another PC, and am able to read the contents with BD Copier correctly with the BDMV properties and structure being displayed properly. This leads me to believe that it is something else on my PC specifically preventing it from working properly, but for the life of me I can't figure out what it is. Any ideas???

I am using a Win7 64-bit machine.

Thanks,

Landon

Originally Posted by landonfoot

Hi Mike,

Thank you for the suggestion. I did verify that my path is just E:\ which is my blu-ray drive. When I hit read, you can see on the bottom left hand side the application searching through the BDMV folder and can even see the files as it is scanning them, but when it is complete there is no output in the structure or properties pane. Even more strange, I can select HDD copy and it will even create the batch file and create the .iso. It just looks like there is something preventing it from displaying the structure in the app. I've attached a screenshot if that helps. Thanks again!

Landon

My Clown BD BD Copier was working perfectly but I just reinstalled my system and am experiencing this exact issue. Is there a dependency that I may have overlooked? Any help appreciated.

[DukeOfUrl]

I've noticed that while my .ini file shows

Output_Format=BD-R DL

and

[BDRDL]
SizeInBytes=50050629632

it seems that every time I run CBDBDC, and despite that "BD-R DL" is shown as my chosen Output Format, the "size bar" is always red, showing >100%, and the main feature is de-selected. Only after I've fiddled with the drop-down and changed the Output Format away & back does this fall into proper green/pct/etc.

And as for the last two posts, maybe you guys need to fiddle with the "Output Format" drop-down (bottom left) also, before the disc properties are shown? I've noticed that too...

[zeroprobe]

Originally Posted by landonfoot

Hey everyone,

I'm just trying out ClownBD Copier for the first time and am running into an odd issue. When I choose the path to my Blu-ray drive and hit read, I can see the folder structure being searched but no results are displayed in the BDMV properties and structure panes. AnyDVD HD status shows that encryption was removed successfully. I am also able to view the structure using BDinfo and TSmuxer GUI successfully. I can also see the contents when using ClownBD, but I would like to use copier so that I can remove extras and languages, but keep the menus. I was able to rip the movie to an ISO with AnyDVD, mount it on another PC, and am able to read the contents with BD Copier correctly with the BDMV properties and structure being displayed properly. This leads me to believe that it is something else on my PC specifically preventing it from working properly, but for the life of me I can't figure out what it is. Any ideas???

I am using a Win7 64-bit machine.

Originally Posted by owine

My Clown BD BD Copier was working perfectly but I just reinstalled my system and am experiencing this exact issue. Is there a dependency that I may have overlooked? Any help appreciated.

Definitely an issue somewhere. I'm also having the exact same problem.

Clicking Read seems to read the files in the status bar, but no other boxes are populated.


Also Windows 7 64bit SP1

Only programs to not are AnyDVD and Alcohol 120%

[zeroprobe]

Weird, installed Windows 7 64bit SP1 on a fresh Virtual Machine which worked fine.

Definitely something corrupt or a installed thats conflicting. Tried in safe mode with the same problem ????.