Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Vista Service pack 1

  1. #1
    Join Date
    Apr 2008
    Posts
    4

    Default Vista Service pack 1

    I just upgraded to Vista SP1 and now when I get thru Shrink then to Decrypter and srart to burn I get an IO error message saying Format is incompatible , any fixes?

  2. #2
    Join Date
    Jan 2007
    Location
    Washington State
    Posts
    5,405

    Default

    Why would slysoft fix shrink and decrypter ? Neither are supported anymore. I can vouch that dvd shrink does work with vista and with sp1.
    My Server System : ASUS P7P55D-E Motherboard, Intel Core i5-750 Lynnfield 2.66GHz, CORSAIR XMS3 8GB DDR3 DDR3 1600 (PC3 12800), XFX HD-Radeon HD 5770 XXX Edition 1GB 128-bit DDR5, Thermaltake Armor MX+, Windows Server 2011 64 Bit Edition
    HL-DT-ST BD-RE GGW-H20L

  3. #3
    Join Date
    Apr 2008
    Posts
    4

    Default

    I don't know I am just telling you my problem, ever since I upgraded I am having problems and was looking for some help.

  4. #4
    Join Date
    Jan 2007
    Location
    Washington State
    Posts
    5,405

    Default

    Can you rip with anydvd then open with dvd shrink? Can you even open dvd shrink?
    My Server System : ASUS P7P55D-E Motherboard, Intel Core i5-750 Lynnfield 2.66GHz, CORSAIR XMS3 8GB DDR3 DDR3 1600 (PC3 12800), XFX HD-Radeon HD 5770 XXX Edition 1GB 128-bit DDR5, Thermaltake Armor MX+, Windows Server 2011 64 Bit Edition
    HL-DT-ST BD-RE GGW-H20L

  5. #5
    Join Date
    Jan 2007
    Posts
    30,519

    Default

    Don't be using Decrypter nor Shrink to rip if a disc contains structural protection. click http://forum.slysoft.com/showthread.php?t=3992 and read fully please


    1. Use Anydvd 6.4.0.7 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6407.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


    4. Use Clonedvd 2.9.1.6 beta: click http://sandbox.slysoft.com/beta/SetupCloneDVD2916.exe

    5. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


    6. If you still have problems, then . . .

    A)
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
    Last edited by Webslinger; 6th April 2008 at 10:52.
    My responses 1) presume you own the original retail disc you are attempting to backup, 2) tend to represent myself only, and 3) do not necessarily represent the views of SlySoft nor its developers. I do not work for SlySoft.

    Please post all technical support questions on the forums instead of private messaging me. Technical support requests sent to me will be ignored. Private message me only for moderation issues, please. Thank you.

    Please read the SlySoft Forum Etiquette before posting.

  6. #6
    Join Date
    Jan 2007
    Posts
    304

    Default

    If, upon "upgrading" to a service pack for Windows.. (any version), you notice you're having problems in areas you didn't before.. another thing you can try is to uninstall the app, and then reinstall it.

  7. #7
    Join Date
    Jan 2007
    Location
    Rollin'
    Posts
    1,847

    Default

    Shrink works with Vista SP1......perhaps Decrypter is the problem? The new "updated" version of DVDDecrypter is ImgBurn and , from what I have read, it works fine with Vista SP1.
    I respond to PM and E-Mail requests
    Been to town.........seen the elephant

  8. #8
    Join Date
    Apr 2008
    Posts
    4

    Default

    Mine is doing the same thing it will burn about 1/2" then says incompatable media try again. Mine is the post right under yours. I did try Any DVD 6.4.0.6 Beta and same thing happens.

  9. #9
    Join Date
    Jan 2007
    Location
    Washington State
    Posts
    5,405

    Default

    Quote Originally Posted by Devo220 View Post
    Mine is doing the same thing it will burn about 1/2" then says incompatable media try again. Mine is the post right under yours. I did try Any DVD 6.4.0.6 Beta and same thing happens.
    Actually your issue is very different than the original post here.
    My Server System : ASUS P7P55D-E Motherboard, Intel Core i5-750 Lynnfield 2.66GHz, CORSAIR XMS3 8GB DDR3 DDR3 1600 (PC3 12800), XFX HD-Radeon HD 5770 XXX Edition 1GB 128-bit DDR5, Thermaltake Armor MX+, Windows Server 2011 64 Bit Edition
    HL-DT-ST BD-RE GGW-H20L

  10. #10
    Join Date
    Jan 2007
    Location
    Washington State
    Posts
    5,405

    Default

    Quote Originally Posted by Webslinger View Post
    Don't be using Decrypter nor Shrink to rip if a disc contains structural protection. click http://forum.slysoft.com/showthread.php?t=3992 and read fully please


    1. Use Anydvd 6.4.0.6 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6406.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


    4. Use Clonedvd 2.9.1.6 beta: click http://sandbox.slysoft.com/beta/SetupCloneDVD2916.exe

    5. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


    6. If you still have problems, then . . .

    A)
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
    Quote Originally Posted by Devo220 View Post
    Mine is doing the same thing it will burn about 1/2" then says incompatable media try again. Mine is the post right under yours. I did try Any DVD 6.4.0.6 Beta and same thing happens.
    Try doing what webslingers quote says, We can't offer anymore help if you fail to offer what was asked.
    My Server System : ASUS P7P55D-E Motherboard, Intel Core i5-750 Lynnfield 2.66GHz, CORSAIR XMS3 8GB DDR3 DDR3 1600 (PC3 12800), XFX HD-Radeon HD 5770 XXX Edition 1GB 128-bit DDR5, Thermaltake Armor MX+, Windows Server 2011 64 Bit Edition
    HL-DT-ST BD-RE GGW-H20L

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •