Results 1 to 3 of 3

Thread: please add intelligent speedup/down detection

  1. #1
    Join Date
    Mar 2012
    Posts
    11

    Default please add intelligent speedup/down detection

    in my dvbv media center i normally have the following framerates:

    24p for hd or ntsc movies
    25p for movies and tv
    50p for hdtv (720p@50fps)

    now i set reclock to "25p (locked)" so 24p always gets upsampled to 25p and frames matches my tvs 50hz.

    the problem is that now hd tv (720p@50fps) gets speeddown to 25fps too.

    please add an option to ignore very big changes of the fps.
    maybe with values that a user can set.
    something like "only speedup/speeddown when difference is xx fps"
    so when i enter "2 fps" 24 to 25 will work and 50 to 25 gets ignored.

    or when "locked" is enabled you have an extra option called "ignore double rate framerates".
    so when a 48, 50 or 60 fps stream is found it doesnt do a speeddown.

    or just add "NTSC SpeedUp (force to 25fps)"
    so when 24p or 23,976 is found it does an automatic speedup to 25fps.

    i hope you know what i mean.

    thank you.
    Last edited by wedok; 26th March 2012 at 01:35.

  2. #2
    Join Date
    Jun 2011
    Posts
    15

    Default

    Hallo wedok!

    Are you sure it's 50p and not 50i deinterlaced to 25p?
    You can also choose "Automatic" instead of "25p (locked)" and set how many percent of speedup/down you want to allow in the ReClock settings.

    Best Regards,
    Hadar

  3. #3
    Join Date
    Mar 2012
    Posts
    11

    Default

    and set how many percent of speedup/down you want to allow in the ReClock settings.
    thx.
    that was it.
    increased from 1% to 10% and now 24p plays @ 25fps when set to "auto (best)"
    Last edited by wedok; 26th March 2012 at 16:42.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •