DVD decodes but will not burn

Discussion in 'AnyDVD' started by anneteri, Dec 22, 2007.

  1. anneteri

    anneteri Member

    With several movies I can get through everything but the burning errors out about half way through. Any suggestions?
     
  2. LEGIN27

    LEGIN27 Well-Known Member

    Post some details....:agree:
     
  3. mike20021969

    mike20021969 Well-Known Member

    sounds like bad blank media to me if it's the burning process (esp. if it's doing the same thing with more than 1 original movie dvd).
    what blank media are you using?
     
  4. bilbo65

    bilbo65 Well-Known Member

    Obviously if it fails during burning, it is not an AnyDVD problem.
     
  5. ricoman

    ricoman Well-Known Member

    I agree with Mike, sounds like a cheap media problem, not AnyDVD. I only recommend TY and Verbatim media. You may initially save pennies with other stuff, but waste time and eventually money when the discs turn into coasters.
     
  6. Webslinger

    Webslinger Retired Moderator

    Anydvd doesn't burn. Consequently, this thread is in the wrong forum.

    1. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic original disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    2) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    3) What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).

    If you don't know how to obtain media codes, you may find the following programs useful:

    http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/

    4) At what speed are you burning your blank media?