Error and any dvd status

Discussion in 'AnyDVD' started by chantal, Feb 23, 2009.

  1. chantal

    chantal Member

    I've been copying a series with no problems but now I am not able to copy the series or any other movie.When I try to copy,I am using 1Click and I don't think that is the problem I believe the problem is with AnyDVD.
    when trying to copy I get a window that says


    An error has occurred while reading the file
    The file may be encrypted or cannot be read by the DVD device.
    If you are using a decrypter you may need to restart it before running1Click

    DVD copy.

    When I open AnyDVD the status is red.
    and the window reads

    Summary for drive E: (AnyDVD 6.5.2.2)
    TSSTCORP CD/DVDW TS-L632M 0A17 Z
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 1432496 sectors (2797 MBytes)
    Total size: 2793234 sectors (5455 MBytes)

    Video DVD (or CD) label: ALLO_ALLO_S6_D1
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    Structural copy protection not found.
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 1!

    Can someone help me?
    Thanks
    Chantal
     
  2. damnskippy

    damnskippy Well-Known Member

    Update to the latest beta of anydvd then try ripping it to disk with anydvd and using 1click on the output.
     
  3. Webslinger

    Webslinger Retired Moderator

    1. Disable CPRx in 1-Click.

    2. Use Anydvd 6.5.2.3: click http://sandbox.slysoft.com/beta/SetupAnyDVD6523.exe


    You may need to reboot after installing if prompted to do so.

    3. Click the red fox icon on your toolbar. Click "default". Click "ok".

    4.
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Windows Explorer will open, and you will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    i) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) Click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"
    m) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at
     
  4. chantal

    chantal Member

    Followed your directions and still getting an error.Enclosed attachment.
    Let me know what I need to do to fix this.
    Thanks
    Chantal
     

    Attached Files:

  5. Webslinger

    Webslinger Retired Moderator

    The disc doesn't look very interesting at all in terms of protection.


    1. Click the red fox icon on your toolbar. Click "default". Click "ok".

    2. Right-click on the fox icon on your toolbar, and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish.

    3. Open your dvd software playback program. Select the "video_ts.ifo" file that you ripped in step 1 as the source file for playback. Any problems?

    4. Then import that rip from step 2 into 1-Click. Any problems?
     
  6. Chris Gonzales

    Chris Gonzales SlySoft Support Team

    Other customers can copy this title. Chantal, please follow Webslinger's advice to disable CPRx in 1Click. You don't need that feature when working with AnyDVD.
     
  7. chantal

    chantal Member

    I always disable CPRX so this is not the problem
     
  8. Webslinger

    Webslinger Retired Moderator


    1. Click the red fox icon on your toolbar. Click "default". Click "ok".

    2. Right-click on the fox icon on your toolbar, and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish.

    3. Open your dvd software playback program. Select the "video_ts.ifo" file that you ripped in step 1 as the source file for playback. Any problems?

    4. Then import that rip from step 2 into 1-Click. Any problems?
     
  9. chantal

    chantal Member

    I tried to do what Webslinger suggested and about 3% into the copy I get
    a pop up window with a red circle and a white X inside that says
    File IO 3 VTS_04_1.VOB116160 532480
    Then I get another window that says
    Delete created files?
    Warning all files in directory C:\Users\testDocuments\ALLO_ALLO_S6_D1
    will be deleted.
    I don't understand how something can just stop working when nothing happened to change anything.
    I'm bummed,is there a solution for this?
    Thanks
    chantal
     
  10. Webslinger

    Webslinger Retired Moderator

    That's a read error, typically indicating a bad original disc even if it plays fine.

    Here are your options in order of likelihood:

    A. The original disc is bad even if it plays fine. Exchange it.

    B. The disc is dirty. Clean it.

    C. Your drive is slowly dying. Try a different drive.

    D. The cable on the back of your drive is bad. Exchange it.
     
  11. chantal

    chantal Member

    I doubt the disc is bad as I have tried 3 different discs and get the same error
    on all of them.
    Cleaned the discs.........didn't help.
    My drive is only 1 year old and I don't have a cable on the back of my drive.
    How about uninstalling Any DVD and re installing it?
    If that might help ......how do I reinstall ?

    Webslinger said:

    A. The original disc is bad even if it plays fine. Exchange it.

    B. The disc is dirty. Clean it.

    C. Your drive is slowly dying. Try a different drive.

    D. The cable on the back of your drive is bad. Exchange it.
     
  12. Webslinger

    Webslinger Retired Moderator

    Don't be so sure. Click http://forum.slysoft.com/showthread.php?t=11981 (take a look at #17 as an example)

    I've seen drives die much faster. Also yours is a slimline drive (an OEM Samsung). Laptop drives are fairly notorious for breaking down early.

    Contact the company that made your laptop to see if a firmware upgrade exists.

    I forgot you're using a laptop drive. I would seriously try another drive.


    That won't fix a faulty disc.

    Download Nero cd-dvd speed. It's a free program. Select the tab labelled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
    Last edited: Feb 25, 2009
  13. Clams

    Clams Well-Known Member

    If it's just on that one disk - you got a bad disk - replace it.
    If it's on all your disks your drive may have gone south.
    Drives die all the time - we see it here frequently.
    But of course, everyone's first guess is that AnyDVD must have suffered a catastrophic failure. They also never seem to think it's odd that the whole board isn't screaming out loud ; because if the problem was really a "broken" release of AnyDVD, of course they are the only one affected in the whole world. :D

    -W
     
  14. Webslinger

    Webslinger Retired Moderator

    If you're interested in crossflashing to the Samsung Sn-S082m, so you don't need to rely on your laptop company's (HP?) firmware, visit
    http://club.cdfreaks.com/f105/how-crossflash-tsstcorp-ts-l632m-slim-tsstcorp-sn-s082m-256021/

    But doing so will void your drive's warranty.
     
  15. chantal

    chantal Member

    A Health Check was run on Vista on my computer and found DVD QuickPlay
    needed an update,I tried to install the update and got an error.
    Is it possible this might be the problem with the error I'm getting when trying
    to copy a DVD on 1Click using AnyDVD ?
    If this is possible I need to try to get this fixed then see if AnyDVD works OK.
    Chantal
     
  16. Webslinger

    Webslinger Retired Moderator

    This particular dvd--or all dvds?

    The only problem I can really see is if that program is active or running in the background trying to access the drive while using Anydvd.

    Again,
    download Nero cd-dvd speed. It's a free program. Select the tab labelled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
  17. chantal

    chantal Member

    Did an update on NVIDIA and also quick play and I was able to copy one disc.Got a read error on the other two discs so I decided to try another random disc and it is giving me read errors again.
    Weired that it let me make one copy then started the error window again.
    Any other suggestions?
    Thanks
    Chantal
     
  18. chantal

    chantal Member

    I tried to do the disc speed scan at Nero and it is an Adobe file????
    It won't let me open it.
    How can an Adobe file scan the disc speed?
    Chantal
     
  19. chantal

    chantal Member

    Ok another question.If my drive is gone,would I be able to use if at all?
    I can watch the movie on the drive,so how can it be bad?
    Sorry I'm not very tech savy.
    Chantal
     
  20. Webslinger

    Webslinger Retired Moderator

    It most certainly is not. It's a zip file. Your windows file extension associations are messed up.

    Vista opens .zip files natively. Inside is an .exe file which you must run.