Issue with Pirates of the Caribbean 2

Discussion in 'Third Party Products' started by woecarlson, Jun 21, 2011.

  1. woecarlson

    woecarlson Active Member

    Hello all,

    Let me know if this is the wrong place for this, but seemed like the closest match. I have tried through two different methods to back-up Pirates 2 Dead Man's Chest and have run into terminal issues in both cases.

    1) Ripping using DVDFab then shrinking to BD-25 with BD Rebuilder...end result is an error about unable to find audio (sorry, I failed to record the log file for this)

    2) Ripping using AnyDVD HD then trying to extract the primary titleset using ClownBD. Also, an audio-related series of error messages.

    For #2 I will attach the ClownBD log file. Since both are audio-based I'm sure the source of both issues is the same or similar. (Apparently the log file was huge so here is a snippet that shows the issues)

    Thanks in advance for your help!
     

    Attached Files:

  2. Ch3vr0n

    Ch3vr0n Translator nl

  3. woecarlson

    woecarlson Active Member

    I agree about your "first of all"...that's why I progressed from scenario #1 to scenario #2! :)

    I will try to re-create the issue(s) with BD Rebuilder and post the log file on that forum.

    In the meantime, any idea why ClownBD isn't liking the ripped file that AnyDVD HD made?
     
  4. FurryGuy

    FurryGuy Well-Known Member

    Posting an AnyDVD log file would be a good start to figuring out what could be a problem with disc itself.
     
  5. woecarlson

    woecarlson Active Member

    Is there a place where log files are stored? I see the "Create Logfile" option in AnyDVD right-click menu but it's grayed out. From the Help guide, it sounds like that function is intended for when there is an error in the ripping process. In my example, as mentioned in the original post, the title ripped completely but the errors came when trying to extract a titleset using ClownBD and/or BD Rebuilder in an attempt to burn only the main movie.
     
  6. whatever_gong82

    whatever_gong82 Well-Known Member

    Here's how to "Post an Anydvd .zip log file"

    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your system tray.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Windows Explorer will open, and you will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    h) When replying or posting in the Slysoft forums, look for the icon that looks like (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    i) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    x) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    j) Click the "Browse" button, and locate and select the .zip file you created.
    k) click "upload"
    l) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for the mods to take a look at


    B. State the a)full error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    I've attached an example of how to create a log file (which I assume that you know how to do, from your response above) and an example of System Information, if your log file can't be created for some odd reason.

    Very strange that you can't create a log file.

    Anyway, the mods should be able to help you out if you can somehow create a System Information log at the very least.
     

    Attached Files:

  7. woecarlson

    woecarlson Active Member

    Ahh...the trick apparently is not to have the ripper component open when wanting to create log file. :)

    Anywhoo, as you requested here is the ZIP file. As far as specifics of the issue, I posted the log file created by ClownBD with my original post. What I had done was:

    1) Rip entire BR to hard drive
    2) Open ClownBD and try to extract just the main movie
    3) Selecting the titleset and checking the appropriate sound/subtitle options (tried once with the PCM soundtrack and once with the DD5.1 soundtrack but results were the same)
    4) After completing the initial scan it produces a series of errors (see original attachment) and quits.

    Let me know if this helps! :)
     

    Attached Files:

  8. woecarlson

    woecarlson Active Member

    Not sure if anyone has had a chance to review the log file I attached earlier (from AnyDVD), but here is the log file from trying to use BD Rebuilder to shrink down the copy with the PCM uncompressed audio down to BD-25 size.

    Thanks!
     

    Attached Files:

  9. mmdavis

    mmdavis Well-Known Member

    Not sure if this is causing your issues or not but you do have packet writing software that can cause conflicts with other programs trying to access the drives.
    To remove the filters:
    You also don't have the drive's region code set. It won't affect BD discs, but could affect DVDs. To set: