Vista Service pack 1

Discussion in 'Third Party Products' started by Devo220, Apr 3, 2008.

  1. Devo220

    Devo220 New Member

    I just upgraded to Vista SP1 and now when I get thru Shrink then to Decrypter and srart to burn I get an IO error message saying Format is incompatible , any fixes?
     
  2. Charlie

    Charlie Well-Known Member

    Why would slysoft fix shrink and decrypter ? Neither are supported anymore. I can vouch that dvd shrink does work with vista and with sp1.
     
  3. Devo220

    Devo220 New Member

    I don't know I am just telling you my problem, ever since I upgraded I am having problems and was looking for some help.
     
  4. Charlie

    Charlie Well-Known Member

    Can you rip with anydvd then open with dvd shrink? Can you even open dvd shrink?
     
  5. Webslinger

    Webslinger Retired Moderator

    Don't be using Decrypter nor Shrink to rip if a disc contains structural protection. click http://forum.slysoft.com/showthread.php?t=3992 and read fully please


    1. Use Anydvd 6.4.0.7 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6407.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


    4. Use Clonedvd 2.9.1.6 beta: click http://sandbox.slysoft.com/beta/SetupCloneDVD2916.exe

    5. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


    6. If you still have problems, then . . .

    A)
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
     
    Last edited: Apr 6, 2008
  6. xCharvelx416

    xCharvelx416 Well-Known Member

    If, upon "upgrading" to a service pack for Windows.. (any version), you notice you're having problems in areas you didn't before.. another thing you can try is to uninstall the app, and then reinstall it.
     
  7. oldjoe

    oldjoe Well-Known Member

    Shrink works with Vista SP1......perhaps Decrypter is the problem? The new "updated" version of DVDDecrypter is ImgBurn and , from what I have read, it works fine with Vista SP1.
     
  8. Devo220

    Devo220 New Member

    Mine is doing the same thing it will burn about 1/2" then says incompatable media try again. Mine is the post right under yours. I did try Any DVD 6.4.0.6 Beta and same thing happens.
     
  9. Charlie

    Charlie Well-Known Member

    Actually your issue is very different than the original post here.
     
  10. Charlie

    Charlie Well-Known Member

    Try doing what webslingers quote says, We can't offer anymore help if you fail to offer what was asked.
     
  11. Webslinger

    Webslinger Retired Moderator

    Your issue has absolutely nothing to do with 1-Click. Do not post in multiple threads about the exact same thing please. Click http://forum.slysoft.com/showpost.php?p=87585&postcount=4 and read fully

    1. Use Anydvd 6.4.0.7 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6407.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    click http://forum.slysoft.com/showthread.php?t=3992 and read fully

    4.
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at

    5. What blank media are you using? Specify

    a. brand name
    b. type (-R, +R, -RW, +RW, RAM, DL, ...),
    c. media code,
    d. capacity/size,
    e. batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and
    f. country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).

    If you don't know how to obtain media codes, you may find the following programs useful:

    * http://dvd.identifier.cdfreaks.com
    * http://www.dvdinfopro.com/

    6. At what speed are you burning your blank media?
     
    Last edited: Apr 6, 2008
  12. oldjoe

    oldjoe Well-Known Member

    What brand of media are you using? Verbatim & TY are the preferred media to use for large amounts of data and to ensure longevity.
     
  13. Devo220

    Devo220 New Member

    I am and have been using Phillips DVD-R have never had a problem before. I went and bought a small pack of Verbatim and same thing happened.
     
  14. Webslinger

    Webslinger Retired Moderator

    Well, considering Anydvd doesn't burn, your issue doesn't have anything to do with Anydvd.

    You're also not providing information that I requested.
     
    Last edited: Apr 6, 2008